• Home
  • Fiberglass Reinforced Mesh
Construction and Infrastructure

Fiberglass Reinforced Mesh

Composite masonry mesh, produced by Terra Tech— one of the best offers which replaced steel reinforcements. The difficulties connected with use of metal reinforcements laid the foundation of search for alternative materials. Corrosion of steel reinforcements in concrete due to the humid environment, influence of chemicals and salts leads to severe damages and destruction of reinforced concrete structures. Concrete coatings, rooms with the increased humidity, port structures, industrial floors, paving made of concrete, etc. belong to such structures. Composite masonry mesh is a product manufactured of corrosion-resistant composite basalt fiber or glass fiber reinforcing circular section rods with a diameter from 2 to 12 mm crossed and fastened with each other at a right angle. The sizes of formed cells can be 50×50 , 100×100, 150х150 millimeters. The mesh is delivered in the form of special sheets (plates) with sizes 1500×380, 1500×500, 2000×500 and 2000×1000 millimeters or coils of 15, 25, 50 or 100 meters in length and we can manufacturing as the client requirements.

Advantages Area of Use Characteristics Fiberglass VS Metal
  • High corrosion resistance
  • High strength
  • Fiberglass does not interfere with radio waves.
  • Temperature Range Composite fittings can be operated in the range from -100 to + 100C.
  • Low heat conductivity - 0.46 W/sq.m, while for metal this indicator is equal to 40-60 W/Sq.m .
  • Fiberglass does not conduct electric current.
  • The weight of the most widespread metal mesh (50*50*3 mm, 0.5*2 m) is equal to 2.22 kg, the similar mesh made from  composite reinforcement  weighs 272 gs, i.e. it is 8 times lighter.
  • The service life of reinforcing fiberglass is more than 80 years.
  • The temperature expansion of fiberglass is on the same level as concrete.
  • It is eco-friendly at production of composite reinforcement a carbon dioxide is emitted by 40 times less, than at production of meta.
  • It is steady against seismological activity of the earth.
  •  Increases bearing capacity of a bricklaying 
  • Reinforcing at Housing and civil engineering:
  •  manufactured concrete structures: internal and external wall panels, including multilayered concrete wall panels (sandwich panels), floor slab panels, beams;
  •  concrete floors;
  •  horizontal seams in a laying of building andconstruction walls;
  •  connection of layers from brick facing with the main layer of cellular blocks;
  •  decorative concrete and gypsum elements;
  •  a plaster layer at construction of facades of
  • buildings;
  •  other construction elements based on concrete, plaster.
  •  Reinforcing at industrial engineering:
  •  manufactured concrete structures: internal and external wall panels, including multilayered concrete wall panels (sandwich panels), floor slab panels, beams;
  •  concrete floors;
  •  hydraulic structures, coastal constructions;
  •   brick and stone walls of buildings and
  • constructions;
  •  decorative concrete and gypsum elements;
  •  other construction elements based on concrete, plaster.
  • Reinforcing at road construction:
  •  road slabs;
  • motor ways, bridges

More From Construction and Infrastructure